We usually see beer kegs in parties or picnic especially with our family and friends. Thirsty people need to drink a lot so the keg is really cost effective and could save money. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. If you do not know how to use a keg tap, then you can waste a lot of beer, and this is why you need to be careful is using it since it is actually easy to use. Improper use of the keg tap can let foam go all over your face or all over you. Getting beer from a keg tap looks easy but it is not as easy as it looks.
In order to get beer from the keg, you need to control the keg tap. With the use of a lever and with the actions of pulling and pressing it, the beer is released. When pressure is released, it pushes the beer up and into the glass. The keg tap is technically a switch and may be an on-off or a close-open switch.
With the beer key directly In front of you, you need to place the beer keg in a stead position for a short while so that the foam it creates when pouring is minimized. When there is too much movement while transporting the keg, the foam builds up. In order to minimize the foal, place the keg where you plan to serve the beer and let it stay for a while. Remove the cap or seal since it will be harder to tap with it. Pros don’t remove the cap or seal because they know how not to put the beer at risk. If you will do it, you need to play it safe.
A portable keg system can be tapped with CO2. Party pump is when pressure is receive by the keg in a single unit pump and tap combination. IN this type, the keg and the beer keg tap are separated. To release the pressure in the ked, the pump is attached and the faucet is opened. You can release beer by applying air pressure to the keg by pumping and pushing the lever or the tap handle.
When beer is mixed with air, it begins to lose its flavor and this is the reason why a pony keg or a portable keg should be consumed in a single day when the beer already loses its flavor. Traditional keg uses an on and off valve. By using this, you are serving by gravity, and there is no air pressure needed. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.…